January 26, 2025
Description
Magnetic holder for SDR antenna (SDR antenna SET) with tripod thread. I bought a dipole antenna for the SDR. However, for home listening I needed to place the antenna on the windowsill. I wanted to limit the scratching of the windowsill, so I modeled a magnetic holder with two arms. Two frames can be used to set the exact required elevation of the antenna. The holder can also be used for light cameras. Printed from PET-G and has not yet been tested in summer weather. Tested with a heavy duty thermal camera.
| Magnetic holder | |
|---|---|
| Magnetic base that contains 6 holes for magnets. The magnets are stored in a holder with an M3 thread (M3 10x3+4 mm). | |
| Arm | |
| Arm with hole for M6 screw. | |
| End arm | |
| End part with hole for tripod screw. |
| Product assembly | |
| The lower part of the magnetic holder. Heat pressed threaded inserts and magnets. | View before assembly |
| Magnets with M3 screw |
| Parts | |
|---|---|
| Pieces | Name |
| 6x | M3 threaded insert (4mm length) |
| 6x | Magnet M3 10x3+4 mm |
| 1x | M6x30 DIN 912 A2 |
| 1x | M6x16 DIN 912 A2 |
| 2x | Nut low DIN 439B M6 |
| 1x | UNC 3/8" screw (optimal length) |
License:
BY
3Dpetr_kolos
