Fallout 4 Inspired VAULT-TEC Nixie Tube Clock

Fallout 4 inspired VAULT-TEC Nixie Tube Clock
 

Bring the retro-futuristic aesthetic of Fallout 4 into your home with this VAULT-TEC-themed Nixie Tube Clock. This 3D printable design is both functional and decorative, making it a perfect project for fans of the Fallout series or vintage electronics enthusiasts.

 

Designed to fit on Bambu Lab A1 mini bed.

 

Boost MeNeed a boost to your S.P.E.C.I.A.L.? Boosting this model won't actually improve your stats, but it will give me the Strength to keep creating cool stuff! Consider it a moral boost.

UPDATES: 

• 2025-01-23: Raw model files now includes front and back panels with graphics removed for your customization.

   

Printing Instructions

• Orientation:
  • Use the orientation provided in the .stl files for optimal results. The body is designed to maintain a natural curve when printed in its default orientation.
• Supports:
  • Required for the slits and stand-offs in the body.
  • Optional for the holes, depending on your printer's capabilities.
• Fit and Tolerances:
  • Decorative copper rings are press-fit but can be secured with a dab of super glue if necessary.
  • Standoffs are also press-fit.
  • Tight tolerances are used for the copper rings, which have an outer diameter of 23 mm.

Assembly Instructions

• Prepare Components:
  • Insert the Nixie tubes into their designated seats (Thingiverse model used).
  • Solder the Nixie tubes but leave the indicator neons unsoldered at this stage.
• Assemble Body:
  • Attach the back panel to the non-slanted side of the body. Slide in the first corner, then bend to fit another.
  • Press-fit or glue the copper rings and inserts into place.
• Install Electronics:
  • Carefully slide the circuit board into position, ensuring the tubes align properly.
  • Insert and isolate wires for the neons before soldering them. Keep the front panel off for easier access during this step.
• Finalize Assembly:
  • Attach the front panel once all wiring is complete.
  • Secure the bottom lid using screws. Take note of the FRONT indication.

 

Notes

If your neon indicators do not come with pre-installed 220k Ohm resistors, you will need to solder one onto one of their leads before installation.

 

Parts List

• Nixie Tube Control Board (USB): Available on AliExpress
• IN-14 Nixie Tubes: Available on AliExpress
• Indicator Neons: Available on AliExpress
• 220k Ohm Resistors: Available on AliExpress
• Decorative Copper Rings: Available on AliExpress or AliExpress
• M3 x 16 mm Screws: Available on AliExpress or Maker's Supply
• M5 Heat-Set Inserts for Columns: Available from Ruthex

 

Filaments Used

• Filalab PLA Marble
• Filalab PLA White

• Rosa3D PLA Starter Black

   

Enjoy building your very own VAULT-TEC Nixie Tube Clock and let it add a touch of post-apocalyptic charm to your space!