Mini Street Light Lantern - Tea Light Holder

Update: I added a Version with a hanger, compatible with the stand and wall mount of my other lantern. Link below!

This is a fully modular mini street lantern with mesh elements. You can build an adorable mini lantern or a taller double or triple tea light holder with it. It creates beautiful shadow patterns, adding a cozy and decorative ambiance to any space.

There are three versions of the lantern:

• Threaded Version: Provides the most secure fit, but it takes a bit more time to reach the tea light to turn it on or off.
• Quick Access Version: The top sits loosely on the base, allowing instant access to the tea light. However, this version is less stable than the threaded one.
• Hanger Version: Also threaded, but with a top mounting ring. It's compatible with the stand and wall mounts of my other lantern, which you can find here: https://makerworld.com/en/models/926474  

The pole is available in four heights: 6cm, 10cm, 18cm and 24cm.

The lantern screws directly on the pole, or you can use a double or tripple adapter to mount two or three lanterns on a single pole.

Note: I added a brim for the top part of the lantern. If your build plate is 100% clean or you are using a cold plate, you should be able to print it without. Disable at your own risk.

Disclaimer: This design can only be used with electric tea lights!

Commercial rights available for my Patreon Supporters. Check out my profile for more beautiful designs.