Tardis Hueforge Paint 200x200

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Matte Marine Blue Transmission Distance: 0.5

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.72mm) swap to Blue

At layer #11 (1.04mm) swap to Marine Blue

At layer #16 (1.44mm) swap to Jade White for the rest.