Hair Dryer Holder

This is a custom-designed and 3D-printed hairdryer holder, created to be mounted using an M4 countersunk bolt, washer and nut. The inner diameter is 95mm at the top and 85mm at the bottom, ensuring a secure fit for the hairdryer.

The design includes a dedicated section where the handle of the hairdryer can rest, providing additional stability and easy access. 

Due to a filament shortage, the print was paused, and a separate cover piece was designed, printed, and glued to complete the model. The final installation, as shown in the images, demonstrates its practical use by securely holding the hairdryer on the edge of a wooden surface.