Apple Watch Under Table Charger Holder

The holder attaches underneath a table / desk / nightstand, the idea being to keep cables and watch out of the way and not take up space on the surface. Comes with a matching cable clip to guide the cable away from the holder for a cleaner look. Just delete from the profile if you don't need it.

Printing

Likely prints okay without supports but I suggest using the print profile to get the best overhang quality. 

The profile includes support blockers to only put support where it's needed.

There will be some small artifacts in the starting overhang depending on your filament, but since this will be facing back and down, it shouldn't be a problem. 

Installation

• Start by feeding the usb plug through the hole from the front
• Line up the cable with the canal on the back and press the charging puck in place
• Press the cable into the cable canal along the back
• Use a 3-4mm screw / sticky pad or CA glue to attach it to the underside of the surface.
• Attach the cable clip with a sticky pad or glue where it makes sense (fits a round 3M 25mm round sticky pad)

Happy charging!