Bluey Bookmark, Keychains, and Fridge Magnets

A one stop shop for Bluey accessories! This print profile has 4 plates. One plate for the bookmark, one for several keychains to choose from, and the last two is a 6x2mm and 4x2mm fridge magnets. Just choose the plate you want to print, or even a single keychain/fridge magnet and delete the others! So much to choose from! 

 

Bookmark - This bookmark, which takes just about an hour to print, is slightly different from my other bookmarks with the hole placed in the corner so it doesn't interfere with Bluey's ear. Just add a tassel and you're all set! If you do not want the hole, simply delete the negative cylinder in the top left corner!

 

Keychains - These beautiful keychains can even be used on bookbags! Your kids will love them! See below for MakerSupply Bill of Materials, or use your own keychain. If you would like to make it double sided by gluing 2 together, I can make a print profile to better match up the taurus ring. Just let me know!

 

Fridge Magnets - I designed the 6x2mm and 4x2mm magnet holes to be press fit with magnets. Glue shouldn't be needed, but can be used if necessary. The hole is also designed so that the magnet just slightly protrudes so it doesn't sit flush on fridge and is easier to remove. The hole is allso purposely slightly off center due to the depth that is needed in Bluey's snout. Also see below for MakerSupply Bill of Materials for magnets.

 

Scale up or down on X/Y axis only. DO NOT adjust Z height!

 

If you get “floating regions” warning, that can safely be ignored and does not required supports. 

 

For Manual Color Change

 

Filaments Used: Bookmark
    PLA BambuLab Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Grey Transmission Distance: 1
    PLA BambuLab White Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.

 

Filaments Used: Keychains and Fridge Magnets
    PLA BambuLab Black Transmission Distance: 0.3
    PLA BambuLab Cyan Transmission Distance: 5
    PLA BambuLab White Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (1.2mm) swap to Cyan
    At layer #21 (1.76mm) swap to White
    At layer #28 (2.32mm) swap to Yellow for the rest.

 

For other fun prints, please consider visiting https://makerworld.com/en/@Hockey_Dad

 

 

Boost MeIf you enjoy any of my prints, please consider a boost! Thank you!

 

If you have any questions or requests, please ask. 

 

Please leave a review!