Storage Tote/Box Pegboard Mounting Bracket

I had a bunch of storage totes/box (Handy brand here in Australia from Bunnings, link below to compare with what might be available for you locally) that can be mounted to a dedicated wall plate using a plastic lip at the rear of the tote.  I wanted to mount these on my existing pegboard, so designed a bracket that adapts to the back of the box. 

This mounting bracket fits into a metal sheet pegboard with holes 25.4mm (1 inch) apart, and should fit holes greater than 4.75mm (3/16 inch). The plastic tab on the rear of the box slots into the bracket.  Multiple brackets can be used to support wider boxes.

I printed this in PETG with 3 walls, but haven't yet tested with PLA.  Tree supports work best for the pegboard tabs. Make sure to print on the side to ensure strength is provided in the direction of the print lines. 

Link to example storage tote/box: https://handy-products.com.au/handy-storage/?tab=totes