iPhone 16 Pro Max Zigzag Case Customizable Button

Recommended

New PLA-optimized iPhone 16 Pro Max Case with Customizable Backplate — stronger, reusable, and fixes the issues of the old model.

Features:

• Buttons and camera protector colors are fully customizable.
• Supports PLA, PETG, and TPU printing (showcase model printed in PLA).
• Use Arachne wall generator with a 0.4mm nozzle to prevent gaps in fine details (<0.45mm).
• Physically tested with an iPhone prototype for a precise fit.
• Camera button area is fragile—install carefully.

• PLA/PETG cases may break when removing the phone—tear open from the camera button area if needed.

• The installation for the V3 is different from what is shown in the video. Please refer to the following installation instructions.

• Due to material shrinkage, the buttons may fit too tightly depending on the filament used. If this happens, try carefully sanding the top edge of the button hole with a small file to remove any leftover support material, or scale the button’s X axis to around 98% (as shown below) before printing for a better fit.

• Do not remove the outer skirt on the button — it’s designed to prevent the button from falling out.

Updates:

Other Cases