Cherry Blossom Anime Girls

3 anime girls in kimonos with cherry bossoms

Project: cherry blossom3.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Elegoo Black Transmission Distance: 0.3
    PLA BambuLab basic red Red Transmission Distance: 4.5
    PLA Elegoo silk Pink Transmission Distance: 12
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to  Red
    At layer #18 (1.52mm) swap to Pink
    At layer #22 (1.84mm) swap to Jade White for the rest.