Brick Audi Quattro 1985 (2:1 scale)

Large 2x Scale Brick Audi Quattro 1985

Here, you will find all the required files to print your own upscaled 1985 Audi Sport Quattro S1  brick model. All parts have been designed and tested for printing using Bambu PLA Basic filament. For this project, AMS is required. If you don't have one, I invite you to check out the Porsche 911 or the Ferrari F40 model.

Boost MeIf you like this model, consider boosting! 🚀 Your support helps me create more models like this one

What you need 📌

• Bambu PLA Basic - White
• Bambu PLA Basic - Black
• Bambu PLA Basic - Yellow
• Bambu PLA Basic - Gray
• Bambu PLA Basic - Red
• Bambu PLA Basic - Orange
• AMS
• Glue (optional)

Although the bricks snap together, I recommend using glue to secure them.

How to build this project 🛠️

• Find the instructions (Search for 1985 Audi quattro brick instructions)
• Download the print profile (.3MF file)
• Print the plates
• Assemble the parts according to the instructions

Tips 💡

• If you are using a different printer or filament brand than Bambu, start by printing the first few parts of the instructions and check the fit. If it's too tight, reduce the flow. If it's too loose, use glue.
• If you struggle to fit the wheels on the axle, scale them down in Bambu Studio and reprint.
• For any other tight parts, reduce the flow in Bambu Studio and reprint. If it's too late to reprint, use a heat gun or hair dryer to heat up the part and assemble it.
• If your parts are warping or not sticking to the bed, try adding supports to all parts.

If you have any questions about the model, please leave them in the comments below, and I will answer as soon as I can.

 

Enjoy the build!

Explore the full lineup: 2x Brick models