Articulated modular Lamp - A1 mini compatible

Articulated lamp with modular design - fully A1 mini compatible

Put together as much joints as you like and secure them with the bolts and screws. 
The adapter is designed to work with 28mm threaded bulb holders (example E14), important is that it comes with a ring, in order to secure the lamp shade. The mount of the lamp is designed to work with any 5mm x 40mm circular hole. 

Be carefully which bulb to use! If it's too hot it might melt the plastic. 

The model in the picture was printed with PLA on the A1 mini with a 0.6mm nozzle and the supertack plate. If you do not have a supertack plate i recommend to add supports / brims to the lamp shade and the cable clips. 

Cheers! 

PS: the bolts are a bit short, but if you clean the supports off well enough you can fit the screw tops with a little pressure!