Cereal Dry Box - Filament Storage - Minimal design

 

 

This Dry Box is specially designed to fit the following cereal box and hygrometer, both available on Amazon:

 

• Container: https://amzn.eu/d/eT83Q96

   

• Hygrometer Rectangular: https://amzn.eu/d/hBrgvKh → Can use other hygrometer that are max 48 mm wide

   

• Hygrometer Round: https://bambulab.com/it-it → Buyable on bambulab store or Aliexpress

   

• Silica Gel: https://amzn.eu/d/3FyGZ6l → Can use other silica gel brand.

 

The design features a modular structure, offering multiple assembly options. You can opt for a simple base with no hygrometer, or choose the full kit, which includes a container for Silica Gel and a dedicated front support for the hygrometer.

!! Since many asked, I’ve released a second container base without a bottom grid to keep broken silica gel pieces from falling out !!
 

The model uses only 60g of filament using supports, and even less if you choose not to print the hygrometer front mod or the silica base.

It’s designed to accommodate filament spools with diameters ranging from 44.5mm to 67.5mm.

This design can be printed on all Bambulab Printers, A1 Mini included, the base and front connect using a dovetail joint with a tight fit.

For those with a printer larger than A1 Mini, I've created a second print profile with no joints, so the entire base prints as a single piece.

You can print using no support at all, but i advice to use them for the base structure.

 

Boost MeLike the design ?, a boost is well accepted.

 

NB: In the print profiles you can find two different round hygrometers, if you have a angle dents one you need to print the “ROUND ANGLED HYGROMETER” one. If not you need to print the normal one.

If the amazon boxes i used are not available in your country/region, you can ceck out this remix made by @Toby3D that uses slightly smaller cereal boxes.