AC/DC Hells Bells - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 113x170mm in size

 

Filaments Used:
PLA+ Sunlu Black 
PLA+ Sunlu Gold 
PLA+ Sunlu White 
This print uses 3 unique filaments

 

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gold
At layer #14 (1.2mm) swap to White
At layer #16 (1.36mm) swap to Black
At layer #18 (1.52mm) swap to Gold
At layer #21 (1.76mm) swap to White for the rest.

 

Hey everyone! During my test print, I accidentally skipped a color change, and it ended up with a white background. But it actually looks pretty cool, so I'm sharing the filament changes with you all in case you want to try it out!

 

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gold
At layer #14 (1.2mm) swap to White
At layer #18 (1.52mm) swap to Black
At layer #21 (1.76mm) swap to Gold for the rest.

 

For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually.
 

If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps remain at the correct layers; changing the height will break the color sequence and ruin the final result.

 

Boost MeFor you it's free, for me it's a lot