Slim Wall Mounted iPhone 15 Pro Max Charging Dock

A wall mounted adaptation of “IPhone 15 Pro Max Wall Standby Mode Dock” by balinlike, adapted from Scott Yu-Jan's “iPhone Standby Mode Dock (designed with OVERWERK)” with wood-like texture applied to be printed with Wood PLA.

Draft shown in pictures was printed with 0.28mm Layer Height, BambuLab White Oak & Rosewood filaments.

Dock: White oak PLA, dried. Light sanding of dock outside texture greatly improves the looks of it by minimising sharp outstanding edges. Recommend using wood-stain post sanding to darken the housing. Printed on Bambu Smooth PEI plate for better Command Strip adhesion/ compatability.

Lever: Rosewood PLA, dried. Use adaptive layer height if you want smoother lever tip edges. Sand lightly, not too much as you do not want the handle to be too loose. Printed on textured PEI plate for nice finish. 

This is a draft version of the dock as I continue working and improving it.

Feedback is appreciated. 

Please go though the print profile settings and refine them as you wish, I am quite new to 3D-printing and the profile included in the project may not be to your liking/ preferences!