Eiffel Tower - 3-piece, No support 14" Print

The Eiffel Tower replica with a no-support print profile. Some of the small details have been slightly enlarged to allow for easy printing with a .4mm nozzle. The print profile is a 200% scale of my original file loaded earlier. This profile is done in a 0.2mm layer profile height and printed in 3 pieces.  You will need some sort of a glue (I used CA glue, but hot glue also works very well) to put the 3 pieces together. Really easy to align and glue together. 
 

This 200% scale print is 14" tall. My other available profile is 100% scale print results in approximately 7.2 inch tall tower, the 130% scale print yields a 9.5" tall model. My Other Eiffel Tower models listed below:
 

• 1-piece, 100% & 130% single-color model: https://makerworld.com/en/models/1063183#profileId-1051801
• 1-piece, 50% and 25% .2mm nozzle model: https://makerworld.com/en/models/1071429#profileId-1061397
• 1-piece, 100% 3-color model: https://makerworld.com/en/models/1071421#profileId-1061385