Tuxedo Cat Bookmark

Beautiful tuxedo cat. No AMS needed, you can manually set pauses instead of filament changes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x149.8mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Gray
    At layer #14 (1.2mm) swap to Jade White for the rest.