POW block Nintendo Switch game holder

Similar to the Thwomp I created before (very similar size).  This holder carries 21 games and is a friction fit requiring no glue or magnets…

 

There are two versions of this with two profiles.  The yellow and red version has a separate game tray which might save on reprinting if the Switch 2 cartridges are vastly different.  Obviously you can choose your own colour scheme!  These are printed at 0.28 just to save on print time, you can easily change to 0.2.  Similarly, you might want to increase the wall count when printing yellow, mine was a cheap generic brand and I can see the infill slightly through it.  Again, this will increase print time.

 

It's meant to be a tight fit!  Once you have fitted the two parts together a few times it will become easier.

 

Tip to putting the two halves together is to locate the back in place and then tilt it so that the front actually locates first before pushing the two together.  

 

Enjoy!

 

Like this?  You could buy me a coffee!  Click or scan the image below.
 

Boost MePlease consider boosting this or any of my other models.  Downloads, ratings and boosts, keep me wanting to create more!