Follow Me QR Code Sign

Follow Me sign, made using Bambu make my sign. I used the attention sign, changed attention to Follow me and added my QR code as the image. Easily change the image to your QR code for your business, link to socials, ways for customers to contact you, etc. In the pictures you can see it from all angles with the dowel rod in the back.

Dowel Rod Trick:

Use painters tape around the rod and then cut through the tape. cleaner slice without all the fraying. Then you can just twist the rod back and forth into the hole printed on the bottom back center. You can use glue for permanent connection with dowel and sign, but unnecessary. 

.95cm rod (3/8"), wooden dowel or you can print a rod that is 9.5mm to fit inside the hole at the bottom. Intended to support the sign to stand with a slight lean on the table for people to easily scan the QR code.

I am going to be using this at a vendor event on my table, it is a link to an allmylinks for my business, website, social and email contact access easily scanned at my table.  Didn't want to have to hold out a keychain at events, something easy for everyone to access.