Sy's Peglock pegboard universal screwdriver holder

The honeycomb design is a simple and versatile way to organize multiple sizes of screwdrivers.   This universal screwdriver holder rack is designed for pegboards with 1-inch (25.4 mm) hole spacing commonly sold in US hardware stores. Designed around Sy's Peglock System, both the pegboard holder and pegboard clips can be printed flat and without supports.  This eliminates the weak pegs that are prone to breaking in other pegboard models because the print orientation is not optimal for the strength of the hooks, which are much stronger when the plane of the hook is parallel to the print bed.  

The build plate includes two pegs for the typical 0.25-inch (6.35 mm) thick "Home Depot" pegboard with 0.25-inch holes.  While pegboards in the US have a standard 1" hole spacing, the actual boards can be a range of thicknesses and hole sizes.  So sizing hooks to fit the thickest boards, results in a loose-fitting hook on the thinner-boards.   You can generate different sized pegs from this Onshape project.

Printing: 

I printed in PETG on the 0.20 mm strength setting.  

Assembly:

To mount, fold each "peglock pegboard clip" with the flat printed sides together.  Insert it into the pegboard so the triangular surfaces point up spaced to match the slots on the rack, then slide the rack down over top.  It should securely fit into place compressing the rack against the board and preventing accidental movement.

Additional Pegboard Organizers:

Links for other styles of pegboard organizers I have created can be found here:  Pegboard Organization for pegboards with 1" hole spacing.