Okarun Dan Da Dan (Turbokarun Dandadan) - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA i3D Tested White Transmission Distance: 5
    PLA i3D Tested Black Transmission Distance: 0.6
    PLA i3D-Tested Red Transmission Distance: 5.5
    PLA Sakata 3D Light Gray Transmission Distance: 1.4
This print uses 4 unique filaments

Swap Instructions:
    Start with White
    At layer #4 (0.4mm) swap to Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to Light Gray
    At layer #22 (1.84mm) swap to White for the rest.