"Heavy Duty" Airmini Mount

I now have a lighter weight version suitable for travel available.  It's at:

     https://makerworld.com/en/models/1193335-lightweight-airmini-holder#profileId-1205503

----------------------

I have the ResMed Airmini mount and it's great for travel.  However, when used “hose up” the Airmini slides out the bottom.

This model is really too big and bulky for air travel.  It is intended to mount in an RV so it a little more bulky than Resmeds.  I did make the fit rather tight intentionally, so I recommend you print the first 10 or 15mm first to see how it fits and if a little scaling is needed.  (I'd recommend you calibrate your filament skrinkage before printing.)

It includes a wall mount and a hanger mount.

I've printed in both PLA and PETG with “standard” settings.

I haven't done any travel testing yet, so please use at your own risk.

Note: It is not interchangeable with the ResMed mounts.

There are limited fillets (rounded corners) on this because FreeCAD really has issues with that.

I'm new to modeling and would appreciate feedback on the model is you print/use it.  I only test it on my printer, so it would help to know if others see differences on theirs.  And, if you like it, boosts are great.

Depending on initial testing and feedback, I may consider doing a “hose support” that would go on top of the holder.