Ooono Co-Driver No2 - protective- / camouflage cap

Update V1.2
Now with 2nd pressure plate. Access to the USB-C port is now also possible on the 2nd pressure plate while the cap is fitted.

Update V1.1.
- Optimized housing for better prints
- Openings in the lid moved slightly further outwards. (Better view of the light strips)
- Size adjustment for improved fit

I printed this cap with PLA. It can be easily attached to your Ooono No2.
The area with the button at the top is cut out so that you can still operate it.
The large button in the middle can also still be used, as the print is thin in this area.
As you can see from the pictures, I used a textured plate (carbon).
If you want, you can also add a sticker to the cap. 
To remove the cap, hold it by the edge where the protrusions are and press it with your thumbs in the center until the cap comes off. No force is necessary!
Have fun with it!

This is my first upload on Makerworld. Suggestions for improvement are welcome.