Boost MeLove this solution for keeping your IKEA Trofast drawers stable and safe? Help others discover it too! Give this model a boost to make it more visible on the platform. Your support will ensure more parents and DIY enthusiasts can benefit from this quick and effective fix. Every boost counts – thank you!
Tired of IKEA Trofast melamine drawer guides falling off the rail? Discover the ideal solution to reinforce your drawers and ensure your children's safety!
These reinforcement supports for IKEA Trofast melamine drawer guides are designed to prevent drawers from falling off the rail, even when loaded. Perfect for furniture intended for children, these supports are lightweight (8g), quick to print (less than 20 minutes), and require no printing supports.
With these supports, no more falling drawers and risks for your children! Download and print now for a quick and effective solution.
Features:
Quick Printing: Less than 20 minutes per support.
Lightweight: Only 8g per support.
No Printing Supports Needed.
Tool-Free Assembly: Easy and quick to install.
Compatibility: Only for white melamine Trofast furniture. Does not work with wooden Trofast furniture.
Instructions:
Print the gauge to determine the distance between the furniture upright and the indexing hole position of the rail.
Depending on the measurement, print the "long" or "short" supports (Trofast_support_court.stl or Trofast_support_long.stl).
For the sides, use the "side" models (Trofast_side_court.stl or Trofast_side_long.stl) and mirror them according to the left or right assembly. The mirrored models are already included in the .3mf file.
Installation is quick and easy. Gently pull the rail, slide the bracket in place and put back the rail while slightly twisting it.
Taposk
