Chapstick Holder Organizer - Gridfinity version

This is the gridfinity version of my original Chapstick holder 

I have created several versions based off the gridfinity system. The 2x3 versions are very close dimensionally to the original design and incorporates 2 versions at this gridfinity size. The first version has 8 holes and a 25mm (1 inch) wide slot at the back. The second version has 12 holes. Similar to the original design, both have a stadium style riser built-in as shown in the sectioned model images. The 12 hole is stadium on all 3 rows. The 8 hole is stadium only for the round holes. 

One difference from the original design is I updated the hole size from 22.25mm to 18mm. Standard tube diameter for ChapSticks is 16mm. being slightly larger eases entry and exit of the ChapStick into the holder. It also gives a little wiggle room for the potentially larger ChapSticks you may have. 

From there I created a 1x1, 1x2, 1x3, and 2x2 versions with the same details. If there is a configuration you need or different hole sizing, feel free to leave a comment and I can get a new one up.

The versions that are 3 gridfinity blocks wide (the 2x3 and 1x3) have the same ChapStick text that my original design incorporated. This text is editable, but make sure you change the part type back to part so you can edit it. If you want the text to be negative (as shown), be sure to change the part type back to negative part. Screen shots with instructions are below:

Step 1: Right click the text shape and select change type

Step 2: select Part

Step 3: Right click the text shape again and now select edit text. Be sure to redo steps 1 and 2 to make it negative again if you want the text to be negative.