Bele Lock Box 2x1

I designed a useful box for you and for myself, which can be scaled and adjusted in various ways, this is a 2x1 box - in two versions - with a partially transparent front and with a full front. You can find a 1x1 box in my other models - please take a look. The system is fully compatible as you can see in the photos - you can connect it as you need.

Please read!!! :

locks between the boxes - there are several sizes - at first glance they look the same, but they are not - they differ by tenths of mm - and that's because what worked for me with PLA with PETG did not work, each filament is a little different - if you need further adjustment - use a decrease or increase by units of percent for the lock - it's a small thing and a minimum of material - so experiments will probably not be a problem for anyone.

Another thing - the drawer is deliberately divided for easier printing into a drawer, a label and a holder. The label and holder come in two versions - either for 1-hole or 2-hole mounting - everyone will like something different - try it and see.
You can write the text on the label in BambuStudio with a different filament - I left it blank for you - but when I printed it for myself, I used exactly this procedure to finish the inscription with the size of the screws - it's up to you.