Lugia (Pokemon hueforge)

Lugia makes a splash in 5 colors! 

Check out my Pokemon collection on Makerworld here: https://makerworld.com/@BusyKikiBee/collections/3605274

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

Patreon members also have access to exclusive designs available only on Patreon.

----------------------------

Pictured frame, stand, or puzzle box can be found in Frames and Functional items over @CanadianGamer https://makerworld.com/@CanadianGamer/collections/1027330

All photos you see are of actual prints of my design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Project: Lugia
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

This print uses 5 unique filaments
PLA BambuLab Matte Dark Blue 
PLA BambuLab Basic Blue Gray 
PLA BambuLab Basic Gray 
PLA BambuLab Basic Turquoise Blue
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Dark Blue
At 0.88mm swap to Blue Gray
At 1.44mm swap to Gray
At 1.6mm swap to Turquoise Blue
At 1.84mm swap to Ivory White for the rest.