Kakashi Chilin

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.54x200mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Dark Gray Transmission Distance: 3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Dark Gray
    At layer #13 (1.12mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Beige for the rest.