Smokestacks for Transformers SS86 Optimus Prime

Since getting SS86 Optimus Prime, one of the biggest things we disliked about this otherwise great version was his loose smokestacks which sometimes rotated off when we were posing him. So here's a quick replacement set which can be affixed more firmly in place!

A simple and small one piece print, it is recommended to print this at 0.16mm or higher resolution for best results.

Once done, this can just be attached into Prime's 5mm port and should stay quite nicely in place.

For a bit more bling, you can also chrome it up using a marker or airbrush. Probably need a few more coats of the chrome but here's a peek of what you can color up it as.

So, hope this will be a useful replacement smokestack if you have lost or damaged the original piece, or just wanted on in a different color or chrome finish. Happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog