Minion on the front of the extruder.

A Minion on the front of the extruder that rolls one eye while printing.

Minion on the front of the extruder

 

 

Please use my profile for printing as I spent some time on it to make sure the print turns out as good as possible.

Let me know if the print was successful and if everything fits. If any corrections need to be made, let me know.
If you have printed it, please leave a rating.
Before installation, the original front and the rotating element must be dismantled.
During installation, the eye should be pressed as far as it will go. After putting the face, the eye should be flush with the face or deeper.
When assembling, make sure that the top latches are flush with the top edge before pressing from the front.
 

If you think that standard hooks are too weak and may break, print a version with reinforced fasteners.
You will see details in the photos below.
 

Boost MeHey! If you like my 3D models, I’d really appreciate it if you hit Boost! 🚀
It’s a big motivation for me to keep creating and sharing new projects with the community.
Every Boost shows it’s worth it – thank you! 🙏

 

See my other projects.

 

Assembly instructions below. (same as Funy Face)

Version with strong top fasteners.