1060 ESC Holder FULLY MODULAR By RGMod

Boost MeLike my model ? Don't forget to boost !

Here is a fully modular 1060 ESC holder.
You can have any quantity of ESCs. They stack on top of each other, creating a “tower”.
Route your wires however you want !

 

In this project, there are 2 mains parts, and 2 top covers.
For the main parts, there are “A to B” and “B to A”. When you print the “A to B”, this means that the next body part needed will be the “B to A”.

The first letter is for the type of the bottom mounting base, and the second letter is for the type of the top mounting base.
This means that the “A to B” body part have the type B top mounting base, so the next body part need to have a type B bottom mouting base.
For the top cover, there is “A to top” and “B to top”. The same principle applies. The type A top cover will mount onto a main body part which has a type A top mouting base.

I hope this is clear.

 

You will need M3x8 or M3x10 or M3x12 self tapping to assemble it.

Don't forget to like and boost if you like my model !