Hexagon Patterned Pot - With Drainage and Dish

It's another decorative flower pot!

I made this because I was try to learn some new tricks in Blender; but the end result is a nice decorative indoor plant pot.

This pot sports a drainage hole in the bottom, and a dish you can put it on to deal with the consequences of this drainage hole.

I recommend printing with a 0.16mm layer height as it seems to work well. I have provided the following sizes in the 3MF file:

• Plate 1: Standard size, diameter is about 90mm
• Plate 2: Enlarged, diameter is about 105mm

Note: If you want the two-tone shown in the pictures you can of course set it up with an AMS, or if you're like me and don't have one simply pause the print at layer 148 (assuming 0.16mm layers), and swap filament there.

Happy printing.