Mini Filament Rack 250g-200g / ~120mm spools

Modular Mini Spool Rack

I did not (quickly) see a Spool Rack for all of my mini (200g/250g) filament spools, so I made one for my needs!

This Spool Rack is 100% 3D Printed and requires NO outside parts! NOT EVEN GLUE!

You can print out & stack as many levels as you want for your needs. There are small pins to help lock each level together and a flat shelf to place at the top!
This Model is A1 Mini Compatible. If you print this out on a larger machine, please upload a print profile with the sides laying flat :)

As for fitment, the 200mm rods that the spools rest on are a TIGHT FIT. This is on purpose. In fact, you may need to slightly even sand down the very last 10mm of each end to better slide into the sides. This was done so that glue would not be needed!
I did up the walls & infill for the 200mm rods as well (4 / 25%, Gyroid).


UPDATE - 5/16/24:

I have Added 2 NEW print Profiles!

Extra(!) & Longer pins to allow for mounting two racks SIDE BY SIDE now!

You also have the option to print shorter pins that don't stick out too far & block the spools from sliding to each side of the rack.
In addition, there are also new pins that have no handle(?) on them too!
Enjoy!