Box - SD card storage box

Memory Box

This memory box will ensure your pendrives, SD and micro SD Cards  are safe and at their place.

Box is water shplashes proof so if you pour water on it there is no risk of damaging your pendrives 

!!(check it while box is empty and then use)!!

Options

There are two type of inserts that you can use to better fit your needs 

How to print it?

Materials:

• TOP / BOTTOM → PLA|PETG|ABS etc (excluding TPU)
• Closing things → if possible carbon reinforced is recommended if not use PLA|PETG|ABS 
• Seal → TPU (if you don't have TPU don't print it out of other material)

Model doesn't require any supports and everything should be snug fit.

How to set it up ?

To put everything together you will need 6x M3x20 screws and all the 3D printed parts (seal is required to water splashes proofnes)

Dont forget to share your results in comments 👌😊❤️