Playstation 5 PS5 PRO & SLIM Anti-Vibration Damper

Boost MeSupport me <3

I designed a vibration damper for the Vertical Stand of the Playstation 5 PRO & SLIM

Increasing the base also improves airflow and thus cooling.

You can choose:

• 10 mm thick with logo
• 10 mm thick without logo
• 5 mm thick with logo
• 5 mm thick without logo

I recommend the 10mm without logo version for the best effect :)

I recommend to print without logo for better vibration damper at 5 mm thickness.

It fits 100% perfect.

 

I can produce this for you.

=== ENJOY AND LEAVE A LIKE :) ===

 

Print Settings

Rafts: No
Supports: No
Infill: 7% GYROID
Filament: TPU or TPE

Notes:

I used TPU(95A) and TPU(82A). 82A is softer and better for that.
Infill 7%.

FLEX is not easy to print for beginners. Use the right settings in your slicer!!

Also very important if you have problems:

1. Release the pressure from the retraction of the filament (bondtech gears)
2. Increase the nozzle temp if you encounter issues (235C is just perfect)
3. No retractions!
4. Print with slow speed! 20-40mm/s
5. If you have problems with the filament sensor, deactivate it.

If you want to print often softs and flexible filaments, you should choose an extruder like Bondtech LGX Shortcut. Much easier with that ;)

 

I also have done one for the normal PS5: https://makerworld.com/en/models/234618#profileId-326300