Shadow Ninja Warrior Figurine

Shadow Ninja Warrior Figurine
 

I added a modifier on its back leg that provides 100% infill in that area. The model was a bit front-heavy, so I had to balance it out. However, even without this modification, it stands on its own on a hard and level surface.

Printed with Fuzzy Skin effect.
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.4
Fuzzy Skin thickness: 0.2

 

All my photos are real and show an actual 3D-printed figure photographed by me.

 

Read.me
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.

MembershipIf you would like to print and sell my models, you can do so through an active subscriptionBoost MeIf you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊

With more and more questions popping up about the commercial use of my models, I’ve set up a special page on Patreon to make it easier for you to do just that! https://patreon.com/29flo