Key holder Volkswagen golf m2 - AMS - hanger

Boost MeEvery boost will help me in my future work! Thank you very much!

Key holder/hanger

• 0,28mm layer height
• 0,4mm Nozzle
• Only MMU/AMS multicolor print.
• 4 colors
• PLA/PETG
• No support needed
• Drag all the files to your slicer and make it into one piece (except “stick .stl”)

If you use screws to attach to the wall, use a screw with a maximum diameter of 4 mm.

 

If you use screws to attach to the wall, you must choose at least 4 perimeters and 6 upper and lower layers.

 

The key holders do not need to be glued to the rest of the hanger. It is enough to press them correctly into the groove and fix them on the wall. Glue can also be used for better adhesion.