HueForge Ghost

Project: ghost.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 95.39x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Generic Lite Gray (Hellgrau) Transmission Distance: 1.4
    PLA Amazon Basic Lite Green (Hellgrün) Transmission Distance: 4.6
    PLA eSun Yellow Transmission Distance: 8
    PLA Fluorescent White Transmission Distance: 4.4
This print uses 4 unique filaments

Swap Instructions:
    Start with Gray
    At layer #10 (0.88mm) swap to Lite Green
    At layer #13 (1.12mm) swap to Yellow
    At layer #15 (1.28mm) swap to Fluorescent White for the rest.