Raiders of the Lost Ark Hueforge 150 x 113 mm

Raiders of the Lost Ark Hueforge in 150x113mm.

 

Mit AMS 4 farbig gedruckt in Schwarz, Rot, Orange und Gelb.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to Orange
    At layer #20 (1.68mm) swap to Yellow for the rest.

 

Boost MeBoost, um mich zu unterstützen.