Bambu X2D X1C P1S P2S P1P Poop Chute V2

Important: For those of you new to Bambu Studio, please print the correct print profile. After clicking ‘Prepare to Print’, navigate down to the print profile that suits your specific printer model. P2S and X2D profiles are towards the bottom of the list.

 

Overview: A clean and tidy way to manage filament poops and a necessity for all P1S, P2S, X1C and P1P owners! I've designed this on bench poop chute with a balance of aesthetics, functionality, print time and filament in mind. Prints in 2-3 hours depending on profile and uses less than 90g of filament. Slide the chute into the printer and begin collecting poops!

 

November 2025 Update: I've received some fantastic feedback over the past 12 months and have incrementally improved this model over time. The current models print faster, cleaner and function even better. I've added a number of print plates to suit various use cases such as P1S or X1C printers using anti-vibration feet, or those using the rear spool holder. I will continue to improve the models so If you have any suggestions of feedback, please let me know in the comments below!

P2S Compatibility: I've added new print plates to suit the new P2S which has larger poop chute and includes its own small anti-vibration feet. 

 

X2D Compatibility: The X2D shares the same poop chute as the P2S, but includes the external exhaust fan from factory. Please print the X2D and P2S (External Exhaust Fan) plate. This model allows the use of CA010 magnets.
 

Print Plates:

• P1S X1C P1P (Standard Model) - Fits printers using AMS
• P1S X1C P1P (Anti-Vibration Feet) - 9mm taller than standard to fit printers using Anti-Vibration feet with AMS
• P1S X1C P1P (No Perforations) - Faster print time. Fits printers using AMS without Anti-Vibration Feet
• P1S X1C P1P (Rear Spool Holder) - Fits printers using the external rear spool holder without Anti-Vibration Feet
• P2S (Standard Model) - Fits P2S printers using AMS or the external spool holder
• P2S (No Perforations) - Faster print time. Fits P2S printers using AMS or the external spool holder
• P2S (CA010 Magnets) - Includes space for two 12 x 3mm button magnets (Makers Supply CA010 below) to locate against the case. Carefully press fit. Fits P2S printers using AMS or the external spool holder
• X2D and P2S (External Exhaust Fan & CA010 Magnets) - Fits X2D and P2S printers using the External Exhaust Fan kit. Includes space for two 12 x 3mm button magnets (Makers Supply CA010 below).

 

 

Alternative Poop Chutes:

• A link to my Poop Chute Slide Bin is here
• A link to my Hanging Poop Chute is here

If you like this print, please leave a comment or a boost!

 

Boost MeI spent a lot of time modelling and printing prototypes before landing on a final design and uploading to Maker World. If you like this model, a boost will be much appreciated.