Mini Plant Pot with Magnet for Succulents

🎯 Recommended Print Settings

For the best results, use a standard 0.4mm nozzle and set the layer height to 0.24mm for the body and 0.2mm for the pattern.

♻️ To keep it lightweight while maintaining stability, print with 8% infill—this saves material without compromising strength.

🧲 Magnets i used are 20x7mm Neodymium Magnets (Brand Wukong)

🛠️ When assembling, use super glue to attach both the pattern and the magnet to the body. Ensure the weight is evenly distributed when placing a plant in the pot to prevent it from rotating .

🙏 If my designs bring a little joy to your day, you can support my work by buying me a coffee. Your support means the world! or you can boost me for free. Thank you