Cubone God of war

Boost MeBoost this model if you would like my work

As well as my other models you can resize this in X and Y but not in Z
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 217.1x190.43mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Jade White Transmission Distance: 8
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA+ Sunlu Yellow Transmission Distance: 10

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Jade White
    At layer #14 (1.2mm) swap to Red
    At layer #18 (1.52mm) swap to Yellow
    At layer #21 (1.76mm) swap to Jade White for the rest.