Blurryface Hueforge

Blurryface Album Hueforge! |-/

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.3mm and the Actual Depth is 1.1mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:

Start with Black
At layer #3 (0.32mm) swap to Red
At layer #8 (0.72mm) swap to Black
At layer #9 (0.8mm) swap to Jade White for the rest.
 

… or use the .3mf file ;)

Edit:

I added a print profile where the base is a little thicker ("Blurryface v2"). Use the 3mf file and you're good to go! If you only have 1 ams, these are swap instructions:

Start with Black
At layer #14 (1.2mm) swap to Red
At layer #21 (1.76mm) swap to Black
At layer #24 (2mm) swap to Jade White for the rest.