Apple iPhone MagSafe Charger - Low Profile Stand

Boost MeIf you like the model, you can boost me for free :)
It helps me to publish more models in the future.
Thanks!

Print in place, easy to install, easy to use!

For all iPhones with MagSafe (iPhone 12 and later). Fits Mini, Normal, Pro and Pro Max devices.

 

-------

Hey!

 

I have developed a low profile iPhone MagSafe stand that fits perfectly under monitors etc. due to its low height of 78 mm (approx. 3.07 in).

 

The most important features:

-The QI Pad is simply clipped into the stand and the cable can be routed to the back using the built-in cable guide.

-The outer holding ring is cut on one side so that iPhones with camera protection or larger cases also fit.

-The QI pad can be removed easily and without damage by pushing with a finger through the hole in the upper section.

-If necessary, rubber can be glued to the underside to prevent it from slipping on the table.
 

The inner diameter of the stand is 62 mm (approx. 2.44 in). Please check if your QI charging pad fits inside before printing!

I'm using the Anker 313 QI Pad.

 

If you are using an original Apple MagSafe Charger, please print this version:

--> To follow, currently under development

 

The iPhone MagSafe Low Profile Stand on my pictures has been printed without support. 

Please choose the print profile with supports for an optimal surface.

Please get in touch if you have any questions.

Enjoy!

NutellaPizza