February 17, 2025
Description
A shipping container monitor lifter and display case! Provides 150mm/6in lift to your monitor, while also displaying whatever you decide to put in it! Fits the Mclaren Mp4/4 set perfectly and even includes small holes on the back wall that locate an axle to pin connector for the spare tires if you choose to go that route! Prints in 3 pieces and utilizes filament as optional alignment pins when being assembled.
Assembly:
Cut filament into 8 separate 220mm pieces and insert into the alignment pin holes on one piece. Slide the middle part onto the alignment pins and glue together. Do the same with the remaining piece and you should have a completed monitor stand! A hole has been integrated to enable a accent light to be used with the stand. I used the Ikea Kapplake USB light in the photos.
A1 Mini Assembly:
A1 Mini printed files assemble the same as the larger files but include much more gluing. The filament for the alignment pin
s can be cut to around 300mm instead of 220mm.
Happy Printing!
License:
Standard Digital File License
DKprints
