Nightfang - Bookmark Blade
C3DFebruary 17, 2025
Description
If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:
Or Subscribe for a commercial License Directly in Maker World:
MembershipC3D Commercial Membership - Authorized Merchant
Nightfang isn’t just a sword—it’s a legend forged in shadow and ice. Its jagged black edges look like they’ve been carved from the darkness itself, while the icy blue steel running down the center hints at a chilling power within. It is built for a warrior who doesn’t just fight but dominates. Whether it belongs to a cursed knight, a vengeful spirit, or a ruler of the underworld, one thing’s for sure—this blade isn’t just for show.
But here’s the twist—it’s actually a bookmark! Designed as two sides that are glued together, it has a sturdy feel that makes it stand out. But if you prefer a sleeker, thinner bookmark, you can use just a single side instead. Either way, it’s the perfect way to mark your place in an epic tale worthy of a warrior.
For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.2 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!
- NOW WITH 0.2 NOZZLE PROFILE READY FOR DOWNLOAD - USE FOR BEST RESULTS
USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Blue Gray Transmission Distance: 3
PLA Jayo Black Transmission Distance: 0.3 / Amazon
PLA+ Jayo Sky Blue Transmission Distance: 4.4 / Amazon
PLA BambuLab Basic Jade White Transmission Distance: 5
Color Pallete:
Swap Instructions:
Start with Blue Gray
At layer #4 (0.4mm) swap to Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Sky Blue
At layer #15 (1.28mm) swap to Jade White for the rest.
