Wargame Tank Imperial Guard

Hello everyone!

I'm continuing my guard imperial collection with this Battle Tank
I've reworked the DELTAX model, all credit to him, his design was good but not super simple for FDM so I did a bit of work…

Original Model by DELTAX : Spiritbreaker- Imperial Medium Battle Tank

I've redesigned the rear of the body, making it longer, squarer and with different exhausts! The sides are cut in two, the assembly system is different and the tank's main turret has been reworked.

 

Pay attention to your Slicer settings, 

• Some parts need to be supported (they are already painted) remember to select “manual support”. 
   
• Some parts need an outer contour to guarantee adhesion to the tray! 
  See images below!

Credit @Zewa666 transformation of the tank really excellent thank you for sharing the photos!

Happy Printing !

And thank you for your support! 
If you have any recommendations or improvements, don't hesitate!

Boost MeIf you like my job ! This project and encouraged me to work on other creations and partnerships. Thank's ! ❤️

Plate PEI Textured Frostbite & Glacier

Many of you have commented on my posts to tell me that you're having problems with warping and adhesion on your plates.
 

Personally, I hardly ever work with bambulab plates any more. All my machines are equipped with Frostbit or Cryogrip.
I consume less because I heat my plates to ~35° and I haven't had any deformation or adhesion problems for a long time.... 
The 1st P1S has had a Cryogrip plate for over 1500 hours (the machine is approaching 4000 working hours) and I've only had to wash the plate once with hot water and soap, without any problems.
 

If you're having problems, try these plates for your machines!

                                       - Find the FROSTBITE plate here -