Celestial

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 200x200mm in size. You can change X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.3mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Gray Transmission Distance: 2
This print uses 4 unique filaments. Substitute as needed.

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #11 (0.96mm) swap to Jade White
    At layer #13 (1.12mm) swap to Gray
    At layer #15 (1.28mm) swap to Jade White for the rest.

Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some love? Consider signing up to show support!