Pixel 4 Leaf Clover Fidget

If you were hoping for a pixel fidget design for St. Patrick's Day - you're in luck! 🍀 Here is a Pixel 4 Leaf Clover Fidget:)

PLA basic filament preferred

Layer Height 0.2mm

Infill 15%

Supports needed under the stem of the clover

Basic PLA is the best for this print. Like my other recent pixel style fidgets,  I don’t recommend PLA Silk or PLA Matte filaments for this print. It is very detailed (on the inside) and the tolerances are small.  I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoother “movement” when done.

Also, if you have any difficulty printing this I recommend:

• Using a glue stick on the print bed
• Slowing the print down

I have also included a 3mf file with the following print profile:

Print Plate #1(Pixel 4 Leaf Clover): one color, supports added under stem of clover

My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)

If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much!

Have fun printing and Happy St Patrick’s Day! 🍀 - Erin