Multiboard Camera Mount

Show Off Your Camera Collection in Style with This Multiboard Mount!

Looking for a sleek and secure way to display your camera collection on your Multiboard? This 3D-printed mount is the perfect solution!

✨ Easy & Strong Printing
The mount is designed with a flat spot so it can be printed upright and have the maximum strength, without the need for supports. To help with bed adhesion, small mouse ears are added so the mount stays securely on the build plate during printing.

📸 Smart Design for Perfect Balance
Cameras are naturally heavy, and mounts can bend under their weight. That’s why this mount is designed with a slight upward angle—so when your camera is placed, it sits perfectly straight.

🎯 Multiple Size Options for Every Camera
Not all cameras are the same size or weight, so I’ve created multiple versions of the mount. Each one is coded on the back for easy identification (e.g., “40-3-5” = 40mm bracket, 3mm slant, 5mm thickness). I recommend starting with the “40-3-5” version and adjusting as needed for larger or smaller cameras.

🔩 Easy Multiboard Installation
Secure the mount to your Multiboard using “Big Thread” screws, like the 13mm Big Thread, Flat Head, T-Bolt for a snug fit. You also need a tripod screw to secure the camera to your mount. Search for “quick release screw”, these dimensions work great witht the mount:

⚠️ Important Disclaimer
I’ve tested these mounts with fairly heavy cameras, but filament strength varies by material and print settings. Be sure to test your setup before loading it with your favorite gear.